J 机械 　机械综合

1 GB/T 324-1988 焊缝符号表示法 Welds-symbolic representation on drawings
2 GB/T 944.1-1985 螺钉用十字槽 Cross recesses for screws
3 GB/T 1031-1995 表面粗糙度 参数及其数值 Surface rougnness--Parameters and their values
4 GB/T 1167-1996 过渡配合螺纹 The threads for transition fit
5 GB/T 1182-1996 形状和位置公差 通则、定义、符号和图样表示法 Geometrical tolerancing--Generalities,definitions,symbols,indications on drawings
6 GB/T 1184-1996 形状和位置公差 未注公差值 Geometrical tolerancing--Geometrical tolerance for features without individual tolerance indications
7 GB/T 1414-1978 管路旋入端用普通螺纹尺寸系列 General purpose screw threads for joints on pipe line--Dimensions
8 GB/T 1415-1992 米制锥螺纹 Metric tape screw thread
9 GB/T 1569-1990 圆柱形轴伸 Cylindrical shaft ends
10 GB/T 1570-1990 圆锥形轴伸 Conical shaft ends
11 GB/T 1801-1979 公差与配合 尺寸至 500mm孔、轴公差带与配合 Tolerance and fitting, dimensions up to 500mm holes, shaft tolerance range and fitting
12 GB/T 1802-1979 公差与配合 尺寸大于 500至3150mm常用孔、轴公差带 Tolerance and fitting, dimensions larger than 500mm andup to 3150mm ordinary holes,shaft tolerance range
13 GB/T 1803-1979 公差与配合 尺寸至18mm孔、轴公差带 Tolerance and fitting, dimensions up to 18mm holes, shaft tolerance range
14 GB/T 1804-1992 一般公差 线性尺寸的未注公差 General tolerances—Tolerances for linear dimensions without individual tolerance indications
15 GB/T 1958-1980 形状和位置公差 检测规定 Rules for inspection of form and position tolerances
16 GB/T 2298-1991 机械振动与冲击 术语 Mechanical vibration and shock—Terminology
17 GB/T 2358-1994 金属材料裂纹尖端张开位移试验方法 Test method for crack-tip opening displacement measurement of metallic materials
18 GB/T 2516-1981 普通螺纹偏差表 (直径1~355mm) Common screw thread deviation table
19 GB/T 3323-1987 钢熔化焊对接接头射线照相和质量分级 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel

20 GB/T 3505-1983 表面粗糙度 术语 表面及其参数 Surface roughness--Terminology--Surface and its parameters
21 GB/T 4096-1983 棱体的角度与斜度系列 Series of angles and slopes on wedges and prisms
22 GB/T 4133-1984 莫氏圆锥的强制传动型式及尺寸 The type and dimensions for positive drive of Morse tapers
23 GB/T 4249-1996 公差原则 Tolerancing principle
24 GB/T 4380-1984 确定圆度误差的方法 两点、三点法 Assessment of departure from roundness--Two-and three-point methods
25 GB/T 4457.4-1984 机械制图 图线 Mechanical drawings--Lines
26 GB/T 4457.5-1984 机械制图 剖面符号 Mechanical drawings--Symbols for sections
27 GB/T 4458.2-1984 机械制图 装配图中零、部件的序号及其编排方法 Mechanical drawings--Item references and its arrangement for assembling drawings
28 GB/T 4458.3-1984 机械制图 轴测图 Mechanical drawings--Axonometric drawings
29 GB/T 4458.4-1984 机械制图 尺寸注法 Mechanical drawings--Dimensioning
30 GB/T 4458.5-1984 机械制图 尺寸公差与配合注法 Mechanical drawings--Indication of tolerances for sizeand of fits

31 GB/T 4459.1-1995 机械制图 螺纹及螺纹紧固件表示法 Mechanical drawings--Representation of screw threads and threaded parts
32 GB/T 4459.2-1984 机械制图 齿轮画法 Mechanical drawings--Conventional representation of gears
33 GB/T 4459.3-1984 机械制图 花键画法 Mechanical drawings--Conventional representation of splines
34 GB/T 4459.4-1984 机械制图 弹簧画法 Mechanical drawings--Conventional representation of springs
35 GB/T 4459.5-1984 机械制图 中心孔表示法 Mechanical drawings--Simplified representation of centre holes
36 GB/T 4459.6-1996 机械制图 动密封圈表示法 Mechanical drawings--Representation of seals for dynamic application
37 GB/T 4460-1984 机械制图 机构运动简图符号 Mechanical drawings--Graphical symbols for kinematic diagrams
38 GB/T 4974-1989 压缩机、凿岩机械与气动工具优先压力 Compressors, rock drilling machines and pneumatic tools—Preferred pressures
39 GB/T 5371-1985 公差与配合 过盈配合的计算和选用 Tolerances and fits--The calculation and selection of interference fits

40 GB/T 5796.1-1986 梯形螺纹 牙型 Metric trapezoidal screw threads—Profile
41 GB/T 5796.2-1986 梯形螺纹 直径与螺矩系列 Metric trapezoidal screw threads--System of diameter and pitch
42 GB/T 5796.3-1986 梯形螺纹 基本尺寸 Metric trapezoidal screw threads--Basic dimensions
43 GB/T 5796.4-1986 梯形螺纹 公差 Metric trapezoidal screw threads--Tolerances
44 GB/T 5847-1986 尺寸链 计算方法 Dimensional chain--Methods of calculation
45 GB/T 5898-1986 凿岩机械与气动工具噪声测量方法--工程法 Measurement of noise emitted by rock drilling machines and pneumatic tools--Engineering method
46 GB/T 6403.1-1986 球面半径 Radii of sphere surfaces
47 GB/T 6403.2-1986 润滑槽 Lubricating grooves
48 GB/T 6403.3-1986 滚花 Knurl
49 GB/T 6403.4-1986 零件倒圆与倒角 Rounding and chamferd of parts
50 GB/T 6403.5-1986 砂轮越程槽 Relief grooves for grinding wheels
51 GB/T 6404-1986 齿轮装置噪声声功率级测定方法 Determination of sound power level for noise emitted by gear units
52 GB/T 6414-1986 铸件尺寸公差 Dimensional tolerances for castings
53 GB/T 6419-1986 潜水焊工考试规则 Regulations for the qualification test of diver-welders
54 GB/T 6444-1995 机械振动 平衡术语 Mechanical vibration--Balancing vocabulary
55 GB/T 6557-1986 挠性转子的机械平衡 The mechanical balancing of flexible rotors
56 GB/T 6558-1986 挠性转子平衡的评定准则 Criteria for evaluating flexible rotor balance
57 GB/T 6567.1-1986 管路系统的图形符号 基本原则 Graphical symbols for piping systems--Basic principles
58 GB/T 6567.2-1986 管路系统的图形符号 管路 Graphical symbols for piping systems--Piping
59 GB/T 6567.3-1986 管路系统的图形符号 管件 Graphical symbols for piping systems--Piping accessories
60 GB/T 6567.4-1986 管路系统的图形符号 阀门和控制元件 Graphical symbols for piping systems--Valves and control regulation actuators

61 GB/T 6567.5-1986 管路系统的图形符号 管路、管件和阀门等图形符号的轴测图画法 Graphical symbols for piping systems--Axonometric representation of graphical symbols for piping, piping accessories and valves etc
62 GB/T 6719-1986 袋式除尘器分类及规格性能表示方法 Classification and specification for bag filters
63 GB/T 7220-1987 表面粗糙度 术语 参数测量 Surface roughness--Terminology--Measurement of surface roughness parameters
64 GB/T 7221-1987 现场平衡设备的说明和评价 Field balancing equipment--Description and evaluation
65 GB/T 7234-1987 圆度测量 术语、定义及参数 Measurement of roundness--Terms, definitions and parameters of roundness
66 GB/T 7235-1987 评定圆度误差的方法 半径变化量测量 Methods for the assessment of departure from roundness--Measurement of variations in radius
67 GB/T 7306-1987 用螺纹密封的管螺纹 Pipe threads where pressure-tight joints are mede on the threads
68 GB/T 7307-1987 非螺纹密封的管螺纹 Pipe threads where pressure-tight jojints are not made on the threads
69 GB/T 7704-1987 Ｘ射线应力测定方法 Residual stress measurement by X-ray
70 GB/T 7920.2-1987 建筑卷扬机术语 Construction winches-Terminology
71 GB/T 7920.4-1987 混凝土机械术语 Concrete machinery--Terminology
72 GB/T 7920.5-1987 压路机和夯实机术语 Rollers and compactors--Terminology
73 GB/T 7920.6-1987 桩工机械术语 Pile driving machinery--Terminology
74 GB/T 7920.7-1987 翻斗车术语 Small dumpers--Terminology
75 GB/T 7920.8-1987 铲运机术语 Serapers--Terminology
76 GB/T 7920.9-1987 平地机术语 Grader--Terminology
77 GB/T 7920.10-1987 混凝土搅拌机械术语 Soil stabilizer--Terminology
78 GB/T 7920.11-1987 沥青混凝土搅拌设备术语 Asphalt mixing plant--Terminology
79 GB/T 7920.12-1987 沥青混凝土摊铺机术语 Asphalt paver--Terminology
80 GB/T 7920.13-1987 混凝土路面铺筑机械与设备术语 Concrete pavement machine and equipment--Terminology
81 GB/T 7920.14-1987 沥青喷洒机术语 Asphalt distributor--Terminology
82 GB/T 7920.15-1987 沥青贮存、熔化和加热装置术语 Asphalt storage, melting and heating units--Terminology
83 GB/T 7920.16-1987 石料摊铺机械术语 Aggregate and chip spreader--Terminology
84 GB/T 7920.17-1987 钢筋加工机械术语 Steel reinforcement (bar) processing machinery--Terminology
85 GB/T 7920.18-1987 装修机械术语 Finishing machinery--Terminology
86 GB/T 8540-1987 振动与冲击隔离器确定特性要求导则 Vibration and shock--Isolators--Procedure for specifying characteristics
87 GB/T 8543-1987 验收试验中齿轮装置 机械振动的测定 Determination of mechanical vibrations of gear units during acceptance testing
88 GB/T 9145-1988 商品紧固件的中等精度 普通螺纹极限尺寸 General purpose screw threads—Limits of sizes for commercial bolt and nut threads—Medium quality
89 GB/T 9146-1988 商品紧固件的粗糙级精度 普通螺纹极限尺寸 General purpose screw threads—Limits of sizes for commercial bolt and nut threads—Coarse quality
90 GB/T 9443-1988 铸钢件渗透探伤及缺陷显示迹痕的评级方法 Methods of liquid penetrant testing and classification of indication for steel castings